CE認證
EN 15283-1:纖維增強石膏板CE認證
EN 15283-1:纖維增強石膏板CE認證
EN 15283-1 : 纖維增強石膏板.定義,要求和測試方法.第1部分:帶襯板增強的石膏板
EN 15283-1 : Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement;
帶襯板增強的石膏板CE認證- EN 15283-1-CPR 305/2011/EU
CE marking to Gypsum boards with mat reinforcement–EN 15283-1–CPR 305/2011/EU
帶襯板增強的石膏板CE認證（歐盟強制認證）－簡介
在歐盟市場“CE”標志屬強制性認證標志，以表明產品符合歐盟《技術協調與標準化新方法》指令的基本要求。這是歐盟法律對產品提出的一種強制性要求。
在纖維增強石膏板上加貼CE標志不但可以證明其產品符合建筑產品指令（CPR 305/2011/EU）及其相關標準（歐洲協調標準EN 15283-1）規定的安全，環保，衛生和消費者保護。而且可以合理規避貿易技術壁壘，在歐洲市場自由銷售并打開其他國際市場。
從2013年7月1日年開始，所有進入歐盟市場的石膏板需要符合新的歐盟建筑產品法規CPR 305/2011/EU，通過測試，獲得認證，并加貼CE標志。
注：歐盟建筑法規CPR（Construction Product Regulation） 305/2011/EU 全面取代歐盟建筑產品指令CPD(Construction Product Directive) 106/89/EEC, 并且從2013年7月1日起強制執行
帶襯板增強的石膏板CE認證－需要符合的產品指令和協調標準
A．產品指令： 建筑產品法規CPR(Construction Product Regulation) 305/2011/EU
B．歐洲協調標準：EN 15283-1 : 帶纖維增強的石膏板.定義,要求和測試方法.第1部分:帶有鋼筋網的石膏板
EN 15283-1 : Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement
帶襯板增強的石膏板CE認證－EN 15283-1-涉及的產品范圍：
此歐洲協調標準規定可用于建筑工程的帶襯板增強的石膏板的相關特性和性能，包括用于輔助制造業。這還包括直接的表面裝飾板或是石膏板。
襯板增強石膏板是根據其類型，尺寸，厚度和邊緣形狀選用。它可用于干燥里墻，吊頂固定，隔墻，或作為包層結構的柱和梁。其他的可以用在地板、通風和排煙管道，線纜橋架和覆蓋物。
此歐洲標準涵蓋以下產品性能特點：防火性能，水蒸氣滲透性、抗折強度和熱阻。
以下是性能特征與石膏板相關：抗剪強度，防火性能，耐沖擊，直接空氣隔音，吸音。若需要，試驗應根據相應的歐洲試驗方法，在模擬組裝系統條件下進行。
Scope：This European Standard specifies the characteristics and performance of gypsum boards with mat reinforcement intended to be used in building construction works including those intended for secondary manufacturing operations. It includes boards designed to receive either direct surface decoration or gypsum plaster.
Gypsum boards with mat reinforcement are selected for use according to their type, size, thickness and edge profile. The boards can be used for example to provide dry lining finishes to walls, to fixed and suspended ceilings, to partitions, or as cladding to structural columns and beams. Other uses can be for floors, ventilation and smoke extraction ducts, cable trays and sheathing applications.
This European Standard covers the following product performance characteristics: reaction to fire, water vapour permeability, flexural strength, and thermal resistance.
The following performance characteristics are linked to systems assembled with gypsum boards with mat reinforcement: shear strength, fire resistance, impact resistance, direct airborne sound insulation, acousticabsorption. If required, tests should be done according to the corresponding European test methods on assembled systems simulating the end use conditions.。
This European Standard also covers additional technical characteristics that are of importance for the use and acceptance of the product and the reference tests for these characteristics. It provides for the evaluation of conformity of the product to this EN.
This European Standard does not cover gypsum boards with mat reinforcement which have been subject to any secondary manufacturing operations (e.g. insulating composite panels, boards with thin lamination etc.).
Products covered by EN 520 or EN 13815 are excluded.
帶襯板增強的石膏板CE認證－認證流程：
1、確定需要認證的產品類型，提交申請
2、確定歐洲產品指令，纖維增強石膏板需符合新的歐盟建筑產品法規CPR 305/2011/EU
3、確定歐洲協調標準，纖維增強石膏板需符合協調標準EN 15283-1
4、根據CPR指令和協調標準EN 15283-1進行測試評估，歐盟公告機構根據認證體系3進行
5、獲得由歐盟公告機構辦法的測試報告和證書
6、發放產品性能聲明(Declaration of Performance)
7、在產品包裝上加貼帶公告機構編碼的CE標志
8、在歐洲市場自由銷售
帶襯板增強的石膏板CE認證－性能要求
CE marking to Gypsum boards with mat reinforcement–EN 15283-1–Requirement
防火性能Reaction to fire：
根據EN13501-1進行測定評估，最低要求E級
（產品用于防火用途，否則根據體系3認證）
我們同時提供其他認證NEW!!
> 歐洲強制CE認證
> 美國船舶海岸警衛USCG認證
> 歐洲船舶Wheelmark認證
> Certifire防火認證
> LPCB防火認證
我們同時提供其他各種測試NEW!!
- 各國防火阻燃檢測認證，EN13501-1,DIN4102-1,BS476-7..
- 室內空氣質量VOC測試, ISO16000
- 聲學測試，隔音測試, ASTM E90, ASTM E413, ISO140-8..
- 化學測試：RoHS, Reach, PAHs測試等等
- 物理測試：拉伸，破壞，彎曲性能，剪切強度等
- 耐磨測試：EN 660-2
- 抗菌測試：ASTM E2180
- 導熱性能測試：EN 12664
----------------------------------------------------------------------------------------------------------------------
- 上一篇：EN 534:波紋瀝青薄板CE認證
- 下一篇：EN 13964:吊頂CE認證
----------------------------------------------------------------------------------------------------------------------
